Netgear XSM4348CS CLI Manual Software Version 12.x - Page 687
match mac-list, no match length
![]() |
View all Netgear XSM4348CS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 687 highlights
M4300 Intelligent Edge Series Fully Managed Stackable Switches Default No match criteria are defined by default. Format match length min max Mode Route Map Configuration Command example: (NETGEAR Switch) (config-route-map)# match length 64 1500 no match length Use this command to delete a match statement from a route map. Format Mode no match length Route Map Configuration match mac-list Use this command to configure a route map in order to match based on the match criteria configured in an MAC access-list. A MAC ACL is configured before it is linked to a route-map. Actions present in MAC ACL configuration are applied with other actions involved in route-map. When a MAC ACL referenced by a route-map is removed, the route-map rule is also removed and the corresponding rule is not effective. When a MAC ACL referenced by a route-map is removed or rules are added or deleted from that ACL, the configuration is rejected. Default Format Mode No match criteria are defined by default. match mac-list mac-list-name [mac-list-name] Route Map Configuration Parameter mac-list-name Description The mac-list name that identifies MAC ACLs. MAC access list name can be up to 31 characters in length. Command example: (NETGEAR Switch) (config-route-map)# match mac-list MacList1 Example 2: This example illustrates the scenario where MAC ACL referenced by a route-map is removed or rules are added or deleted from that ACL, this is how configuration is rejected: (NETGEAR Switch) #show mac access-lists Routing Commands 687 CLI Command Reference Manual
![](/manual_guide/products/netgear-m43008x8f-cli-manual-software-version-12x-6ae8ad6/687.png)