Netgear XSM4348CS CLI Manual Software Version 12.x - Page 351

M4300 Intelligent Edge Series Fully Managed Stackable Switches show rmon events This command displays the entries in the RMON event table. Format Mode show rmon events Privileged Exec Term Description Event Index An index that uniquely identifies an entry in the event table. Each such entry defines one event that is to be generated when the appropriate conditions occur. The range is 1 to 65535. Event Description A comment describing the event entry. The default is alarmEvent. Event Type The type of notification that the probe makes about the event. Possible values are None, Log, SNMP Trap, Log and SNMP Trap. The default is None. Event Owner Owner string associated with the entry. The default is monitorEvent. Event Community The SNMP community specific by this octet string which is used to send an SNMP trap. The default is public. Owner Event owner. The owner string associated with the entry. Last time sent The last time over which a log or a SNMP trap message is generated. Command example: (NETGEAR Switch) # show rmon events Index Description Type Community Owner Last time sent 1 test log public MIB 0 days 0 h:0 m:0 s show rmon history This command displays the specified entry in the RMON history table. Format Mode show rmon history index {errors [period seconds] | other [period seconds] | throughput [period seconds]} Privileged Exec Term Description History Control Index An index that uniquely identifies an entry in the historyControl table. Each such entry defines a set of samples at a particular interval for an interface on the device. The range is 1 to 65535. History Control Data The source interface for which historical data is collected. Source History Control Buckets Requested The requested number of discrete time intervals over which data is to be saved. The range is 1 to 65535. The default is 50. Utility Commands 351 CLI Command Reference Manual