Netgear XSM4348CS CLI Manual Software Version 12.x - Page 879

M4300 Intelligent Edge Series Fully Managed Stackable Switches description and link-state request packets. For the seconds argument, a valid value is in the range from 0 to 3600 seconds (1 hour). Default Format Mode 5 ipv6 ospf retransmit-interval seconds Interface Config no ipv6 ospf retransmit-interval This command sets the default OSPF retransmit Interval for the specified interface. Format Mode no ipv6 ospf retransmit-interval Interface Config ipv6 ospf transmit-delay This command sets the OSPF Transit Delay for the specified interface or range of interfaces. The transmit delay is specified in seconds. In addition, it sets the estimated number of seconds it takes to transmit a link state update packet over this interface. For the seconds argument, a valid value is in the range from 0 to 3600 seconds (1 hour). Default Format Mode 1 ipv6 ospf transmit-delay seconds Interface Config no ipv6 ospf transmit-delay This command sets the default OSPF Transit Delay for the specified interface. Format Mode no ipv6 ospf transmit-delay Interface Config OSPFv3 Graceful Restart Commands The OSPFv3 protocol can be configured to participate in the checkpointing service, so that these protocols can execute a graceful restart when the management unit fails. In a graceful restart, the hardware to continues forwarding IPv6 packets using OSPFv3 routes while a backup switch takes over management unit responsibility. Graceful restart uses the concept of helpful neighbors. A fully adjacent router enters helper mode when it receives a link state announcement (LSA) from the restarting management unit indicating its intention of performing a graceful restart. In helper mode, a switch continues to IPv6 Commands 879 CLI Command Reference Manual