Netgear XSM4348CS CLI Manual Software Version 12.x - Page 569
set igmp header-validation, set igmp-plus, If IGMP IP header validation is enabled, three fields
![]() |
View all Netgear XSM4348CS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 569 highlights
M4300 Intelligent Edge Series Fully Managed Stackable Switches no set igmp report-suppression Use this command to return the system to the default. Format Mode no set igmp report-suppression VLAN Config set igmp header-validation This command enables IGMP IP header validation. If IGMP IP header validation is enabled, three fields, TTL (Time To Live), ToS (Type of Service), and Router Alert options, are checked. The actual validated fields depend on the IGMP version. The TTL field is validated in all the versions (IGMPv1, IGMPv2, and IGMPv3). The Router Alert field is validated in IGMPv2 and IGMPv3. The ToS field is validated only in IGMP version3. Default Format Mode Enabled set igmp header-validation Global Config no set igmp header-validation This command disables the IGMP IP header validation. Format Mode no set igmp header-validation Global Config set igmp-plus This command enables all of the following global IGMP Snooping configuration commands: • set igmp • set igmp querier • set igmp flood-report • set igmp exclude-mrouter-intf • set igmp fast-leave auto-assignment Default Format Mode Enabled set igmp-plus Global Config Switching Commands 569 CLI Command Reference Manual
![](/manual_guide/products/netgear-m43008x8f-cli-manual-software-version-12x-6ae8ad6/569.png)