Panasonic HPX500 Operating Instructions - Page 102
Connecting the AJ-RC10G Extension Controller
![]() |
UPC - 791871302965
View all Panasonic HPX500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 102 highlights
Chapter 5 Preparation Connecting the AJ-RC10G Extension Controller • Some functions can be remote-controlled when the AJ-RC10G extension control unit (optional) is connected to the camera. • When the AJ-RC10G is connected, the camera automatically enters remote control mode after the power switches of both the camera and the AJRC10G are turned ON. REMOTE connector AJ-RC10G • Be sure to turn OFF both the camera and the AJ-RC10G power switches before connecting or disconnecting the controller cable. • If RC DATA SAVE (AJ-RC10G) is set to OFF, the camera-related setting values, which have been adjusted or set using the AJ-RC10G, will be cancelled when the camera power switch is turned OFF. Also, the setting values cannot be written to an SD memory card. However, the menu settings performed using the AJ-RC10G can be written to an SD memory card. Next time the AJ-RC10G is connected, the setting values will return to the AJ-RC10G settings. • If RC DATA SAVE (AJ-RC10G) is set to ON, the values adjusted or set using the AJ-RC10G are retained, even after the camera power switch is turned OFF. • The USER switch on the camera does not function when the AJ-RC10G is connected. • Refer to the Operating Instructions of the AJ-RC10G incuded in the supplied CD-ROM. 102 Connecting the AJ-RC10G Extension Controller
![](/manual_guide/products/panasonic-hpx500-operating-instructions-b1d4959/102.png)