Panasonic HPX500 Operating Instructions - Page 71
Warnings, P2 card playback data indication, <Thumbnail operations>
![]() |
UPC - 791871302965
View all Panasonic HPX500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
Chapter 4 Adjustments and Settings for Recording 27 Special recording display This display appears when the REC FUNCTION option of the setting menu RECORDING SETUP screen is set to INTERVAL, ONE SHOT or LOOP, and when PRE REC is set to ON. A P2 card inserted in a free slot after start of a special recording mode is not used for recording. Insert P2 cards before start of recording. Stop special recording and insert the P2 card again. 28 Lens chromatic aberration compensation (CAC) indicator During a mode check, it indicates that lens chromatic aberration compensation (CAC) operates normally. 29 AWB, ABB error indication In a mode check, the status of AWB and ABB that do not operate normally is shown. ■Safety zone The range of the zone is indicated by the SAFETY ZONE item on the DISPLAY SETUP screen. • 4:3: This indicates the position which is cropped to 4:3. • 90%: This indicates the range (90%) in which signals can be displayed by an ordinary home-use TV set. Warnings • COPY INHIBITED Input of DV formats via the 1394 connector in MCR mode cannot be recorded normally since the contents are copyright protected. • EXTERNAL 1394 DISCONNECT When the 1394 CONTROL item of the OTHER FUNCTIONS screen of the setup menu is set to EXT and recording without connecting external units with 1394 terminal, this display appears. • INCOMPATIBLE CARD The card cannot be used since it does not comply with the specified standard. • DIR ENTRY NG CARD Indicates a card where folder location has become corrupted. This type of card cannot be used for special recording modes (interval, ONE SHOT and loop recording). A warning appears when such a P2 card is inserted in a P2 device or when recording is completed. • RUN DOWN CARD Indicates that a P2 card has nearly reached the end of its life. This warning message appears each time the card is inserted or recording is stopped, and it will continue to appear until the card is replaced with a P2 card with sufficient life remaining. Proper recording and playback may not be possible with a P2 card that is near the end of its life, so we recommend replacing it with another one as soon as possible. • FORMAT ERR ! Indicates a P2 card that does not meet the P2 card standard. • CANNOT ACCESS Cannot access clips. • CANNOT DELETE Cannot delete clips. • CANNOT FORMAT Cannot format P2 cards or SD memory cards. • CANNOT REPAIR Cannot repair clips. • CARD FULL The P2 card does not have enough free space for recording. • WRITE PROTECTED The P2 card or SD memory card is writeprotected. • NO CARD A P2 card or SD memory card has not been inserted. • NO FILE There are no files (version upgrade files, etc.). P2 card playback data indication • EOS: End of stream. No more data is available in the forward playback direction. • BOS: Beginning of stream. No more data is available in the rearward playback direction. • P2 SLOT: Appears when pressing the USER button to which SLOT SEL is assigned. 71 Viewfinder Screen Status Displays
![](/manual_guide/products/panasonic-hpx500-operating-instructions-b1d4959/71.png)