Panasonic HPX500 Operating Instructions - Page 65
Outputting the time code externally, External synchronisation of
UPC - 791871302965
View all Panasonic HPX500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
Chapter 4 Adjustments and Settings for Recording To unlock the externally locked time code Discontinue external time code supply, then position the TCG switch at [R-RUN]. Cautions in switching the power source from battery to external power supply Connect the DC IN socket with the external power supply before removing the battery pack, in order to keep the time code generator energized. If the battery pack is removed first, there is no guarantee that the time code will stay externally locked. External synchronisation of the camera when the time code is externally locked When the time code is externally locked, the reference video signals input through the GENLOCK IN connector gen-lock the camera. • To externally lock the AG-HPX500P/E, as the master device, with more than one unit, the mode must be the same as that of the camera. Note that in a system using both interlaced and progressive scanning, there may be breaks in the video and time code. • Note that switching to MCR mode will disrupt GENLOCK synchronization resulting in loss of image stability. • When the 24P or 24PA is selected and the time code is externally locked, be sure to input a non-drop frame time code. The time code cannot be externally locked when drop frame mode is selected. When the time code is externally locked, the video may be distorted, but this is because of the 5-frame adjustment and not a malfunction. Outputting the time code externally To output time code from the camera's TC OUT connector to a VTR or other recording device in sync with camera picture or playback picture, set the setting menu TC VIDEO SYNCRO (OUTPUT SEL) to VIDEO OUT. Set also the setting menu GL SELECT (OTHER FUNCTIONS) to SDI or COMPOSITE to suit video output. AG-HPX500P/E SDI OUT or VIDEO OUT TC OUT TC IN TC VIDEO SYNCRO setting: VIDEO OUT VIDEO IN SDI IN HD SDI IN VTR, etc. When the setting menu TC VIDEO SYNCRO is set to VIDEO OUT, the time code is output via TC OUT in tune with VIDEO OUT delay. 65 Setting Time Data