Panasonic HPX500 Operating Instructions - Page 91
Mounting and Adjusting the Lens, Mounting the Lens - lens cap
UPC - 791871302965
View all Panasonic HPX500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 91 highlights
Mounting and Adjusting the Lens Mounting the Lens 1 Raise the lens clamping lever and remove the mount cap. 3 Lower the lens clamping lever to clamp the lens. Chapter 5 Preparation Mount Cap Lens Clamping Lever 2 To mount the lens, align the indentation at the top center of the lens mount with the center mark of the lens. Mark 4 Secure the cable through the cable clamp, and plug it into the LENS connector. LENS Connector 5 Adjust the lens flange back. • Please refer to the lens instruction manual for guidance on lens handling. • When the lens is removed, install the mount cap to protect the device. 91 Mounting and Adjusting the Lens
91
Mounting and Adjusting the Lens
Chapter 5 Preparation
Mounting and Adjusting the Lens
Mounting the Lens
1
Raise the lens clamping lever and
remove the mount cap.
2
To mount the lens, align the indentation
at the top center of the lens mount with
the center mark of the lens.
3
Lower the lens clamping lever to clamp
the lens.
4
Secure the cable through the cable
clamp, and plug it into the LENS
connector.
5
Adjust the lens flange back.
<Notes>
•
Please refer to the lens instruction manual for
guidance on lens handling.
•
When the lens is removed, install the mount
cap to protect the device.
LENS Connector
Mark
Mount Cap
Lens Clamping Lever