Panasonic HPX500 Operating Instructions - Page 114
Contents of P2 Card Status Display, Settings, P2 Card Remaining Capacity/Total
UPC - 791871302965
View all Panasonic HPX500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 114 highlights
Chapter 6 Manipulating Clips with Thumbnails Contents of P2 Card Status Display Settings Select PROPERTY → CARD STATUS. The following screen appears. ■When "REMAIN" is selected: 51 2 3 4 4 1 Write-protect Mark The mark appears if the P2 card is writeprotected. 2 P2 Card Status (remaining free space) The remaining memory capacity of the P2 card is indicated by a bar graph and percentage. The bar graph indicator moves to the left as the remaining free space decreases. The following indications may appear, depending on the card status: • FORMAT ERROR: An unformatted P2 card is inserted. • NOT SUPPORTED: An unsupported card is inserted in the camera. • NO CARD: P2 cards are not inserted. Press the SET button to view the following data for the card in the selected slot (indicated in yellow numbers). • BRAND: maker name • MODEL NO.: model number • SERIAL NO.: serial number • USER ID: user ID • WARNING: DIR ENTRY NG (DIR location error) RUN DOWN CARD (life) 3 P2 Card Remaining Capacity/Total Capacity Displays the P2 card remaining capacity and total capacity in minutes. The total of the remaining memory capacity for each P2 card that is displayed may not match the actual total remaining memory capacity for the P2 cards because only the figure in minute is displayed. 114 Properties 4 Total remaining memory capacity for all cards • Displays the total remaining free space for all 4 slots. Please note that the remaining capacity of a write-protected P2 card is not included in the total remaining capacity. • When REC FUNCTION (RECORDING SETUP) is set to LOOP, the total remaining memory capacity for all cards indicates the minimum guaranteed recording time for the loop recording. When "REMAIN" is selected, the value of this indication is smaller than the actual possible recording time. 5 Warning card mark The mark appears when the following P2 cards are inserted. • DIR ENTRY NG • RUN DOWN CARD Use the 2 P2 card status to check the nature of the warning. ■When "USED" is selected: 51 2 3 4 1 Write-protect Mark The mark appears if the P2 card is writeprotected. 2 P2 Card Status (used memory capacity) The used memory capacity of the P2 card is indicated by a bar graph and a percentage figure. The bar graph indicator moves to the right as the used memory capacity increases. The following indications may appear, depending on the card status: • FORMAT ERROR: An unformatted P2 card is inserted. • NOT SUPPORTED: An unsupported card is inserted in the camera. • NO CARD: P2 cards are not inserted. Press the SET button to view the following data for the card in the selected slot (indicated in yellow numbers). • BRAND: maker name • MODEL NO.: model number • SERIAL NO.: serial number • USER ID: user ID • WARNING: DIR ENTRY NG (DIR location error) RUN DOWN CARD (life)