Panasonic HPX500 Operating Instructions - Page 125
OUTPUT SEL screen, DISPLAY SETUP screen
UPC - 791871302965
View all Panasonic HPX500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 125 highlights
Item F.MIC POWER2 R.MIC POWER F.MIC CH1 LEVEL F.MIC CH2 LEVEL R.MIC CH1 LEVEL R.MIC CH2 LEVEL HEADROOM MONITOR MODE Description of settings (Items in bold are factory settings.) Turns on and off the phantom power supply for the front microphone connected to CH2. ●ON, OFF Turns on and off the phantom power supply for the rear microphone. ●ON, OFF Selects the input level for the front microphone connected to CH1. ●-40 dB, -50 dB, -60 dB Selects the input level for the front microphone connected to CH2. ●-40 dB, -50 dB, -60 dB Selects the input level for the rear microphone connected to CH1. ●-50 dB, -60 dB Selects the input level for the rear microphone connected to CH2. ●-50 dB, -60 dB Sets the headroom (standard level). ●59.94Hz System: 18 dB, 20 dB ●50 Hz System: 18 dB, 20 dB Switches speaker and earphone audio delay. ●LIVE: No audio delay ●RECORDING: Recorded (delayed) audio Chapter 7 Menu Operations OUTPUT SEL screen Item Description of settings (Items in bold are factory settings.) CMPNT/SDI SEL / Selects D or SDI connector. ●59.94Hz system: AUTO, 1080i, 480i ●50 Hz system: AUTO, 1080i, 576i If this item is set to AUTO, the REC FORMAT setting will be applied. SDI METADATA Turns on and off metadata superimposition onto the SDI signal. / ●ON, OFF SDI EDH Turns on and off EDH superimposition onto the SD-SDI signal. / ●ON, OFF Selects whether to delay time code output. TC VIDEO SYNCRO ●TC IN: Outputs the input from the TC IN connector without delay. ●VIDEO: Outputs the time code with delay according to the output video. DISPLAY SETUP screen Item ZEBRA DETECT MARKER SAFETY ZONE DATE/TIME / LEVEL METER / ZOOM CARD/BATT / P2CARD REMAIN / Description of settings (Items in bold are factory settings.) Selects the brightness level of the leftleaning zebra patterns on the screen. ●50 %, 55 %, 60 %, 65 %, 70 %, 75 %, 80 %, 85 %, 90 %, 95 %, 100 %, 105 % Turns on or off the center marker display. ●ON, OFF Set this item to ON to display the marker. The brightness status is also displayed. Sets SAFETY ZONE. ●OFF, 90 %, 4:3 Sets whether to display the date and time on the screen and whether to output from the VIDEO IN/OUT jack. ●OFF: The date and time are not displayed. ●TIME: The time is displayed. ●DATE: The date is displayed. ●TIME&DATE: The time and date are displayed. Select ON to display the audio level meter. ●ON, OFF Turns zoom value display on and off. ●ON, OFF Displays zoom values between Z00 to Z99. Turns on and off card and battery remaining level. ●ON, OFF Switches the indication of remaining P2 memory card capacity. ●TOTAL: Indicates total remaining capacity of all cards. ●ONE-CARD: Indicates the remaining capacity of the card that is being recorded. 125 Setup menu list