Panasonic HPX500 Operating Instructions - Page 93

White Shading Adjustment, DEFAULT, USER1, USER3 or

Get Panasonic HPX500 - Camcorder - 1080i PDF manuals and user guides
UPC - 791871302965
View all Panasonic HPX500 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 93 highlights

Chapter 5 Preparation 3 Use the JOG dial button to select DEFAULT, USER1, USER2, USER3 or OFF and press the JOG dial button. • To adjust the white shading, select USER1, USER2 or USER3. • The USER1, USER2 or USER3 settings do not contain any compensation data by default. • Store compensation data that suits KJ16ex7.7B IRSD PS12 and KJ16ex7.7B KRSD PS12 in DEFAULT. For lenses other than those above, perform the "White Shading Adjustment" described below. LENS SETUP SHADING SELECT SHADING(USER) CAC PROPERTY CAC CARD READ CAC FILE DELETE CAC FILE INIT IRIS ADJUST DEFAULT USER1 USER2 USER3 OFF OFF PUSH MENU TO RETURN White Shading Adjustment Coloring may occur in the vertical direction near the open setting of the lens iris even when the white shading has been adjusted. This is an optical characteristic and not indicative of a failure. 1 Place the camera in the adjustment mode. (1) Mount a lens on the camera. • Do not forget to connect the lens cable. (2) Turn off the electronic shutter and set the gain to L (0 dB). (3) If the lens comes with an extender, disengage it. (4) Open the setting menu LENS SETUP screen and select USER1, USER2 or USER3 under SHADING SELECT. (5) Use the JOG dial button to select SHADING (USER), select YES and press the JOG dial button. • The message "CHECK LUMINANCE LEVEL ZEBRA ON VF" appears. LENS SETUP SHADING SELECT SHADING(USER) CAC PROPERTY CAC CARD READ CAC FILE DELETE CAC FILE INIT IRIS ADJUST USER1 YES OFF PUSH MENU TO RETURN CHECK LUMINANCE LEVEL ZEBRA ON VF SHADING: USER1 SET OK? YES NO PUSH DIAL 93 Mounting and Adjusting the Lens

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
93
Mounting and Adjusting the Lens
Chapter 5 Preparation
3
Use the JOG dial button to select
DEFAULT, USER1, USER2, USER3 or
OFF and press the JOG dial button.
•
To adjust the white shading, select USER1,
USER2 or USER3.
•
The USER1, USER2 or USER3 settings do
not contain any compensation data by default.
•
Store compensation data that suits
KJ16ex7.7B IRSD PS12 and KJ16ex7.7B
KRSD PS12 in DEFAULT. For lenses other
than those above, perform the “White
Shading Adjustment” described below.
PUSH
MENU
TO
RETURN
SHADING(USER)
SHADING SELECT
LENS SETUP
DEFAULT
CAC PROPERTY
CAC CARD READ
CAC FILE DELETE
CAC FILE INIT
IRIS ADJUST
OFF
USER1
USER2
USER3
OFF
White Shading Adjustment
<Note>
Coloring may occur in the vertical direction near the
open setting of the lens iris even when the white shading
has been adjusted. This is an optical characteristic and
not indicative of a failure.
1
Place the camera in the adjustment
mode.
(1)
Mount a lens on the camera.
• Do not forget to connect the lens cable.
(2)
Turn off the electronic shutter and set the
gain to L (0 dB).
(3)
If the lens comes with an extender,
disengage it.
(4)
Open the setting menu LENS SETUP
screen and select USER1, USER2 or
USER3 under SHADING SELECT.
(5)
Use the JOG dial button to select
SHADING (USER), select YES and press
the JOG dial button.
•
The message “CHECK LUMINANCE
LEVEL ZEBRA ON VF” appears.
PUSH
MENU
TO
RETURN
SHADING(USER)
SHADING SELECT
LENS SETUP
USER1
CAC PROPERTY
CAC CARD READ
CAC FILE DELETE
CAC FILE INIT
IRIS ADJUST
OFF
YES
YES
NO
CHECK LUMINANCE LEVEL
PUSH DIAL
ZEBRA ON VF
SHADING: USER1 SET OK?