Panasonic HPX500 Operating Instructions - Page 59

Recording time codes and user bits Chapter 4 Adjustments and Settings for Recording These values are recorded as listed below depending on system frequency and recording format. MODE. SYSTEM FREQ REC MODE/ MCR MODE FRAME RATE (FILM CAM) Subcode area time code VIDEO AUX area time code (VITC) Recorded time code frames Output time code frames Displayed time code frames Subcode area user bits VIDEO AUX area user bits (VITC UB) 1080i/60i 1080i/30P Not related Depends on time code mode*1 Depends on time code mode*1 30 30/24 30 switchable Depends *7 on user Locked to frame rate 1080i/24P 1080i24PA Not related Locked to Locked to non-drop non-drop frame 30 frame rate*2 rate*2 30/24 bits 30 switchable mode*4 *7 data 720P/60P 720P/30P 12P to 60P (except at 24P) Depends on time code mode*1 Depends on time code mode*1 30 720P/24P Locked to Locked to 59.94 Hz 24P non-drop non-drop frame 30 30/24 30 switchable Depends *7 on user Locked to frame rate 30 30/24 switchable bits mode*4 data CAMERA frame rate*2 rate*2 *7 mode 720P/30PN 12P to 60P Depends on time code mode*1*6 Depends on time code mode*1*6 30 30 Locked at 30 Depends on user Locked to frame rate 720P/24PN 12P to 60P Locked to non- Locked to drop frame non-drop frame rate*2*6 rate*2*6 24 30 Locked at 24 bits mode*4 data 480i/60i 480i/30P Not related Depends on time code mode*1 Depends on time code mode*1 30 30/24 30 switchable Depends *7 on user Locked to frame rate 480i/24P 480i/24PA Not related Locked to Locked to non-drop non-drop frame 30 frame rate*2 rate*2 30/24 bits 30 switchable mode*4 *7 data 59.94 Hz 1080i/60i 720P/60P 480i/60i Not related Records VIDEO Depends on AUX area time time code code input via 30 mode*3 1394 regardless of setting 30 30/24 switchable *7 Depends Records VIDEO AUX on user area user bits input bits via 1394 regardless mode*5 of setting MCR mode (recording of 1394 720P/30PN input) 720P/24PN Not related Not related Not recorded Not recorded (Playback 30: (Playback 30: frame) frame) Not recorded (playback 30: frame) Not recorded (playback 30: frame) - - - (Playback: 30) - (Playback: 30) - (Playback: locked at 30) - (Playback*8: 30/24 switchable) Not recorded Not recorded (playback: frame rate data is converted and generated in synch with video pull-down) 1080i/50i Not 50 Hz CAMERA mode 1080i/25P 720P/50P 720P/25P 720P/25PN 576i/50i 576i/25P 50 Hz MCR mode (recording of 1394 input) 1080i/50i 720P/50P 576i/50i 720P25PN related 12P to 50P 12P to 50P Not related Not related Not related *1 *1 Depends *1*6 *1*6 25 25 Locked at on user Locked to frame rate 25 bits data mode*4 *1 *1 *3 Records VIDEO AUX area time code input via 25 1394 regardless of setting 25 Locked at 25 Depends Records VIDEO AUX on user area user bits input bits via 1394 regardless mode*5 of setting Not recorded Not recorded Not recorded - - (Playback: 25) - (Playback: 25) Not recorded (playback: frame rate data is converted and generated in synch with video pull-down) *1 In Free Run mode, slaved to time code input to the TC IN connector. *2 In Free Run mode, slaved to non-drop frame time code input to the TC IN connector. *3 Setting F-RUN TC SAVE to 1394 in Free Run mode slaves it to the input from the 1394 connector, not to the TC IN connector input. *4 Setting TC IN UB REGEN to ON in the setting menu slaves it to user bits input to the TC IN connector. *5 Setting 1394 UB REGEN to ON in the setting menu slaves it to user bits input to the 1394 connector. *6 Should the set capture frame rate differ from the recording frame rate, it is locked to Rec Run (not slaved) *7 Only in FILM CAM mode. In VIDEO CAM mode, it is locked at 30 frames. *8 Only in FILM CAM mode. In VIDEO CAM mode, it is locked at 24 frames. 59 Setting Time Data