Panasonic HPX500 Operating Instructions - Page 27
Viewfinder, Viewfinder securing screw
UPC - 791871302965
View all Panasonic HPX500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Viewfinder 13 11 8 7 9 10 Chapter 2 Parts and their Functions 12 42536 1 1 Viewfinder (supplied accessory) During recording or playback, the viewfinder displays the video image in monochrome. It also displays warnings, messages, zebra patterns, markers (safety zone and center markers), etc. 2 ZEBRA (zebra pattern) switch This switch is used to display the zebra pattern in the viewfinder. ON: Zebra pattern displayed. OFF: No zebra pattern displayed. 3 TALLY switch Used to control the front tally lamp. ON: Tally lamp goes on. OFF: Tally lamp goes out. 4 PEAKING control Used to adjust the outlines of the video image in the viewfinder for easier focusing. Recorded video and output camera signals are not affected. 5 CONTRAST control Used to adjust the contrast of the video image in the viewfinder. Recorded video and output camera signals are not affected. 6 BRIGHT control Used to adjust the brightness of the video image in the viewfinder. Recorded video and output camera signals are not affected. 7 Front tally lamp This lamp goes on during recording when the TALLY switch is set to [ON]. It also blinks in synchronisation with the REC lamp in the viewfinder, and provides alerts. 8 Viewfinder securing screw Used to attach or remove the viewfinder. 9 Eyepiece 10 Diopter adjustment ring Use this to make adjustments in line with your diopter, in order to obtain optimum clarity in the viewfinder image. 11 Connecting plug 12 Locking button 13 Microphone holder 27