Panasonic HPX500 Operating Instructions - Page 117

Chapter 7 Menu Operations 4 Use the JOG dial button (or the Up and Down cursor buttons) to highlight the item you want to change. SW MODE MID GAIN HIGH GAIN W.BAL.PRESET USER MAIN USER1 USER2 6dB 12dB 3.2K SPOTLIGHT GAIN:18dB SLOTSEL PUSH MENU TO RETURN 5 Use the JOG dial button (or the SET button) to change the setting value. SW MODE MID GAIN HIGH GAIN W.BAL.PRESET USER MAIN USER1 USER2 6dB 12dB 3.2K 5.6K GAIN:18dB SLOTSEL Initializing the menu settings The menu settings contain both the user file settings and the scene file settings. You can initialize them separately. To initialize the user file (i.e. all the settings other than the scene file settings) Select INITIAL in USER FILE of the OTHER FUNCTIONS screen. The current menu settings of user file will return to the factory settings. To initialize the scene file From the 6 scene files, select the one you want to initialize with the SCENE FILE dial. Then in the SCENE FILE screen, LOAD/SAVE/INIT, select INITIAL. The settings for only the selected scene file are returned to the factory settings. • This does not effect the other scene files. PUSH MENU TO RETURN 6 To change other settings, repeat steps 4 and 5. • When you finish, press the MENU button to return to the function screen. 7 To change other functions, repeat steps 2 to 5. • To exit the function screen and return to the normal screen, press the MENU button again. Direct close function When the MENU button is pressed and held down after making a menu setting closes the setting menu screen without first returning to the previous setting menu. 117 Viewfinder and LCD Menus