Panasonic HPX500 Operating Instructions - Page 88
Mounting the Viewfinder and Adjusting its Position, Mounting the Viewfinder
![]() |
UPC - 791871302965
View all Panasonic HPX500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
Chapter 5 Preparation Mounting the Viewfinder and Adjusting its Position This section shows how to mount and adjust the supplied viewfinder and the optional AG-VF11G viewfinder, which is equivalent to the supplied one. When using a viewfinder other than these two viewfinders, see the Operating Instructions provided with that viewfinder. • Note that old attachment models are not supported. Mounting the Viewfinder 1 Confirm that the POWER switch is turned off. 2 Connect the plug to the viewfinder connector. Make sure that the plug is firmly seated in the viewfinder connector. Loosen 5 Turn the viewfinder securing screw clockwise (to prevent it from falling off). 6 Tighten the viewfinder right-left positioning rings. Be sure to firmly tighten the viewfinder securing screw on the viewfinder right-left positioning module. The viewfinder may fall off if the viewfinder securing screw is not properly tightened. Adjusting Viewfinder RightLeft Position 1 Loosen the viewfinder right-left positioning ring. 2 Slide the viewfinder right and left to find a position that facilitates viewing. Tighten 3 Loosen the viewfinder right-left positioning ring. 4 Turn the viewfinder securing screw counterclockwise (to cancel the safety mechanism) and slide the viewfinder in the direction of the arrow. Viewfinder right-left positioning ring 3 Tighten the right and left viewfinder positioning ring. Viewfinder securing screw 88 Mounting the Viewfinder and Adjusting its Position
![](/manual_guide/products/panasonic-hpx500-operating-instructions-b1d4959/88.png)