Dell PowerConnect 5548 User Guide - Page 102
Dest. MAC Address, Wildcard Mask, VLAN ID, Cos Mask, Ether type, Time Range Name, Time Range, Action
View all Dell PowerConnect 5548 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 102 highlights
- Dest. MAC Address - Match the destination MAC address to which packets are addressed to this address. In addition to the Destination MAC address, you can enter a Wildcard Mask that specifies which bits in the source address are used for matching and which bits are ignored. A wildcard of 00:00:00:00:00:00 means the bits must be matched exactly; ff:ff:ff:ff:ff:ff means the bits are irrelevant. Any combination of 0s and ffs can be used. - Any - Check to indicate that the destination address is not matched. - VLAN ID - Match the packet's VLAN ID to this VLAN ID. The possible VLAN IDs are 1 to 4095. - CoS - Match the packet's CoS value to this CoS value. - Cos Mask - Match the packet's CoS value to one of these CoS values. - Ether type - Match the packet's Ethertype to this one. - Time Range Name - Check to associate a time range with the ACE. Select one of the time ranges defined in the Time Range page. - Action - Select the action taken upon a match. The following options are available: • Permit - Forward packets that meet the ACL criteria. • Deny - Drop packets that meet the ACL criteria. • Shutdown - Drop packets that meet the ACL criteria, and disable the port to which the packet was addressed. - Logging of Dropped Packets - Check to activate logging of dropped packets. 102 Dell PowerConnect 55xx Systems User Guide