Dell PowerConnect 5548 User Guide - Page 656

- Egress Shaping Rate - Enable/disable egress traffic limitation. If this field is selected, enter the following fields. - Committed Information Rate (CIR) - Enter the average maximum amount of data allowed to be sent on the egress interface, measured in bits per second. - Committed Burst Size (CBS) - Enter the maximum burst of data that is allowed to be sent on the egress interface, even though it is above the CIR. This is defined in number of bytes of data. Configuring Bandwidth Using CLI Commands The following table summarizes the CLI commands for configuring fields in the Bandwidth pages. Table 22-6. Bandwidth CLI Commands CLI Command traffic-shape committed-rate [committed-burst] no traffic-shape rate-limit committed-rate-kbps [burst committed-burst-byte] no rate-limit Description Sets shaper on egress port. Use no form in order to disable the shaper. Limits the rate of the incoming traffic. Use the no form to disable rate limit. The following is an example of the CLI commands: console(config)# interface gi1/0/5 console(config-if)# traffic-shape 124000 9600 console(config-if)# rate-limit 150000 656 Dell PowerConnect 55xx Systems User Guide