Dell PowerConnect 5548 User Guide - Page 303

- Next Server - Enter the IP address of the next server in the boot process of a DHCP client. If the next server in the boot process is not configured, the DHCP server uses inbound interface helper addresses as boot servers. - Next Server Name - Enter the name of the next server in the boot process. - Image File Name - Enter the name of the file that is used as a boot image. Defining Static Hosts Using CLI Commands The following table summarizes the CLI commands for defining static hosts. Table 9-55. Defining Static Hosts Using CLI Commands CLI Command ip dhcp pool host no ip dhcp pool host ip host name address [address2 address3 address4] no ip host name show hosts clear host Description Configures a DHCP static address on a DHCP Server and enters the DHCP Pool Host Configuration mode. Use the no form of this command to remove the address pool. Defines the static host name-toaddress mapping in the host cache. Use the no form of this command to remove the static hostname-toaddress mapping. Displays the default domain name, the list of name server hosts, the static and the cached list of host names and addresses. Deletes entries from the host nameto-address cache. See Table 11-53 for the remaining CLI commands that are common to the Network Pool pages, but are used in the context DHCP Pool Host context. Dell PowerConnect 55xx Systems User Guide 303