Dell PowerConnect 5548 User Guide - Page 402
show interfaces advertise, gigabitethernet, tengigabitethe, channel
View all Dell PowerConnect 5548 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 402 highlights
Table 10-8. Port Configuration CLI Commands (Continued) CLI Command Description show interfaces advertise Displays the interface's negotiation advertisement settings. show interfaces status [[gigabitethernet|tengigabitethe rnet] port-number|port-channel LAG-number] Displays the status for all configured interfaces. show interfaces description [[gigabitethernet|tengigabitethe rnet] port-number|port-channel LAG-number] Displays the description for all configured interfaces. The following is an example of the CLI commands: console(config)# interface gi2/0/1 console(config-if)# description "RD SW#3" console(config-if)# shutdown console(config-if)# no shutdown console(config-if)# speed 100 console(config-if)# duplex full console(config-if)# negotiation console(config-if)# back-pressure console(config-if)# flowcontrol on console(config-if)# mdix auto console(config-if)# end console# show interfaces configuration gi2/0/1 Flow Admin Back Mdix Port Type Duplex Speed Neg control State Pressure Mode gi2/0/1 1G-Copper Full 1000 Enabled Off Up Disabled Auto console# show interfaces status gi2/0/1 Flow Link Back Mdix Port Type Duplex Speed Neg ctrl State Pressure Mode gi2/0/1 1G-Copper -- -- -- -- Down -- -- 402 Dell PowerConnect 55xx Systems User Guide