Dell PowerConnect 5548 User Guide - Page 678

- Exceed Action - Select the action to be performed on incoming packets that exceed the CIR. The possible options are: • None - No action is performed on packets exceeding the defined CIR value. • Drop - Packets exceeding the defined CIR value are dropped. • Remark DSCP - The DSCP values of packets exceeding the defined CIR value are rewritten to a value entered in the DSCP Mapping pages. Defining Aggregate Policers Using CLI Commands The following table summarizes the CLI commands for setting the fields in the Aggregate Policer pages. Table 22-14. Aggregate Policer CLI Commands CLI Command Description qos aggregate-policer aggregate-policer-name committed-rate-kbps excessburst-byte[exceed-action {drop|policed-dscp-transmit}] no qos aggregate-policer aggregate-policer-name Defines the policer parameters that can be applied to multiple traffic classes within the same policy map. Use the no form of this command to remove an existing aggregate policer. The following is an example of the CLI commands: console(config)# qos aggregate-policer policer1 124000 9600 exceed-action drop 678 Dell PowerConnect 55xx Systems User Guide