Dell PowerConnect 5548 User Guide - Page 387
Configuring Green Ethernet Using CLI Commands, Remote Rx Timer
View all Dell PowerConnect 5548 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 387 highlights
- Remote Rx Timer (μsec) - Indicates the local link partner's reflection of the remote link partner's Rx value. Configuring Green Ethernet Using CLI Commands The following table summarizes the CLI commands for configuring Green Ethernet. Table 10-3. Green Ethernet CLI Commands CLI Command green-ethernet short-reach no green-ethernet short-reach green-ethernet short-reach force no green-ethernet short-reach force green-ethernet short-reach threshold cable-length no green-ethernet short-reach threshold green-ethernet power-meter reset eee enable no eee enable eee lldp enable no eee lldp enable show eee Description Enables/disables Green Ethernet short reach mode. Forces short-reach mode on an interface. Use the no form of this command to return to the default. Set the maximum cable length for applying short-reach mode. Use the no form of this command to return to the default. Resets the power save meter. Enables the EEE mode globally. Can be used globally or per interface. Use the no format of the command to disable the mode. Enables EEE support by LLDP on an Ethernet port. Use the no format of the command to disable the support. Displays EEE information. Dell PowerConnect 55xx Systems User Guide 387