Dell PowerConnect 5548 User Guide - Page 275

- Expiry Date - If Aging is selected, displays the expiration date of the enable password. - Lockout Status - Displays the number of failed authentication attempts since the user last logged in successfully (if the Enable Login Attempts checkbox is selected in the Password Management page.) Specifies LOCKOUT, when the user account is locked. - Reactivate Suspended User - Check to reactivate the specified user's access rights. Access rights can be suspended after unsuccessfully attempting to login. Assigning Enable Passwords Using CLI Commands The following table summarizes the CLI commands for setting fields displayed in the Enable Password page. Table 9-47. Enable Password CLI Commands CLI Command enable password [level level] d [encrypted] no enable password [level level] Description Sets a local password to control access to user and privilege levels. Use the no form of this command to remove the password requirement. The following is an example of the CLI commands: console(config)# enable password level 15 secret TACACS+ The device can act as a Terminal Access Controller Access Control System (TACACS+) client. TACACS+ provides centralized validation of users accessing the device, while still retaining consistency with RADIUS and other authentication processes. TACACS+ provides the following services: • Authentication - Provides authentication during login and via user names and user-defined passwords. • Authorization - Performed at login after authentication. The TACACS+ server checks the privileges of the authenticated user. Dell PowerConnect 55xx Systems User Guide 275