Dell PowerConnect 5548 User Guide - Page 139

Table 8-13. Port-Based Authentication Interface CLI Commands (Continued) CLI Command Description dot1x re-authentication no dot1x re-authentication Enables periodic re-authentication of the client. Use the no form of this command to restore the default configuration. dot1x timeout re-authperiod Sets the number of seconds between re- seconds authentication attempts. no dot1x timeout supp-timeout Use the no form of this command to restore the default configuration. dot1x re-authenticate Manually initiates a re-authentication of [[gigabitethernet|tengigabit all 802.1X-enabled ports or the specified ethernet] port-number] 802.1X-enabled port. dot1x timeout quiet-period Sets the number of seconds that the seconds device remains in the quiet state following no dot1x timeout quiet-period a failed authentication exchange. Use the no form of this command to restore the default configuration. dot1x timeout server-timeout seconds no dot1x timeout servertimeout Sets the time for the retransmission of packets to the authentication server. Use the no form of this command to restore the default configuration. dot1x timeout supp-timeout seconds Sets the time for the retransmission of an EAP request frame to the client. no dot1x timeout supp-timeout Use the no form of this command to restore the default configuration. dot1x timeout tx-period seconds no dot1x timeout tx-period Sets the number of seconds that the device waits for a response to an EAP request/identity frame, from the client, before resending the request. Use the no form of this command to restore the default configuration. show dot1x Displays 802.1X status for the device or [[gigabitethernet|tengigabit for the specified interface. ethernet] port-number] Dell PowerConnect 55xx Systems User Guide 139