Dell PowerConnect 5548 User Guide - Page 287
Defining RADIUS Servers Using CLI Commands, Source IP Address, RADIUS
View all Dell PowerConnect 5548 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 287 highlights
- Source IP Address - The device IP address that is used for communication with RADIUS servers. Defining RADIUS Servers Using CLI Commands The following table summarizes the CLI commands for defining fields displayed on the RADIUS pages. Table 9-51. RADIUS Server CLI Commands CLI Command Description radius-server host {ipv4- Specifies a RADIUS server host. address|ipv6-address|ipv6zaddress|hostname} [auth-port auth-port-number] [acct-port acct-port-number][timeout Use the no form of the command to delete the specified RADIUS server host. timeout] [retransmit retries] [deadtime deadtime] [key key- string] [source {ipv4- address|ipv6-address}] [priority priority] [usage {login|802.1x|all}] no radius-server host {ipv4address|ipv6-address|hostname} radius-server timeout timeout no radius-server timeout radius-server source-ip sourceip-address no radius-server source-ip source-ip-address Sets the interval for which a device waits for a server host to reply. Use the no form of this command to restore the default configuration. Specifies the source IPv4 address that will be used for the IPv4 communication with RADIUS servers. Use the no form of this command to restore the default configuration. Dell PowerConnect 55xx Systems User Guide 287