Dell PowerConnect 5548 User Guide - Page 427

Defining GARP Timers Using CLI Commands This table summarizes the CLI commands for defining GARP timers as displayed in the GARP Timers pages. Table 12-1. GARP Timer CLI Commands CLI Command Description garp timer {join|leave|leaveall} timer_value Adjusts the GARP application join, leave, and leaveall GARP timer values. show gvrp configuration Displays GVRP configuration infor- [[gigabitethernet|tengigabitether net]port-number|vlan vlanid|port-channel LAG-number] mation, including timer values, whether GVRP and dynamic VLAN creation are enabled, and which ports are running GVRP. The following is an example of the CLI commands: console(config)# interface gi1/0/1 console(config-if)# garp timer leave 900 console(config-if)# end console# show gvrp configuration gi1/0/11 GVRP Feature is currently Disabled on the device. Maximum VLANs: 223 Port(s) GVRP Registration Dynamic VLAN Timers (milliseconds) Status Creation Join Leave Leave All --------- gi1/0/11 Disabled Normal Enabled 200 900 10000 Dell PowerConnect 55xx Systems User Guide 427