Dell PowerConnect 5548 User Guide - Page 684

- Ingress Committed Burst Size (CBS) (Range: 3000 - 16769020) - Enter the CBS in bytes. See its description in the Bandwidth pages. - Exceed Action - Select the action assigned to incoming packets exceeding the CIR. The possible options are: • None - No action. • Drop - Packets exceeding the defined CIR value are dropped. • Out-of-Profile DSCP - Packets, exceeding the defined CIR, are forwarded with a new DSCP, derived from the DSCP Mapping pages. Defining Policy Class Maps Using CLI Commands The following table summarizes the CLI commands for setting the fields in the Policy Class Maps pages. Table 22-17. Policy Class Maps CLI Commands CLI Command Description class class-map-name [accessgroup acl-name] no class class-map-name Defines a traffic classification and enters the Policy-map Class Configuration mode. Use the no form of this command to detach a class map from the policy map. trust [cos-dscp] no trust Configures the trust state, which selects the value that QoS uses as the source of the internal DSCP value. Use the no form of this command to return to the default trust state. set {dscp new-dscp|queue queue- Sets new values in the IP packet. id|cos new-cos} no set Use the no form of this command to return to the default values. police committed-rate-kbps committed-burst-byte [exceedaction {drop|policed-dscptransmit}] Defines the policer for classified traffic. Use the no form of this command to remove a policer. no police 684 Dell PowerConnect 55xx Systems User Guide