Dell PowerConnect 5548 User Guide - Page 434

Table 13-1. STP Global Parameter CLI Commands (Continued) CLI Command Description spanning-tree pathcost method {long|short} no spanning-tree pathcost method Sets the default path cost method. Use the no form of this command to return to the default configuration. spanning-tree priority priority no spanning-tree priority Configures the spanning tree priority. Use the no form of this command to restore the default device spanning-tree priority. spanning-tree hello-time seconds no spanning-tree hello-time Configures the spanning tree bridge Hello Time, which is how often the device Broadcasts Hello messages to other devices. Use the no form of this command to restore the default configuration. spanning-tree max-age seconds Configures the spanning tree bridge no spanning-tree max-age maximum age. seconds Use the no form of this command to restore the default configuration spanning-tree forward-time Configures the spanning tree bridge seconds forward time, which is the amount of time no spanning-tree forward-time a port remains in the listening and learning states before entering the forwarding state. Use the no form of this command to restore the default configuration. show spanning-tree Displays spanning tree configuration. [[gigabitethernet|tengigabite thernet] port-number|port- channel LAG-number] [instance instance-id] show spanning-tree [detail] [active|blockedports] [instance instance-id] Displays detailed spanning tree information on active or blocked ports. show spanning-tree mstconfiguration Displays spanning tree MST configuration identifier. 434 Dell PowerConnect 55xx Systems User Guide