Dell PowerConnect 5548 User Guide - Page 205

The previously-assigned IP addresses are displayed. 2 To add an IP address to an interface, click Add, and enter the fields: - IP Address - Enter the IP address assigned to the interface. - Network Mask - Select the subnetwork mask to which traffic can be routed. - Prefix Length - Enter the number of bits that comprise the IP address prefix of the subnetwork. - Interface - Select the interface for which the IP address is defined. Select an interface type Port, LAG, or VLAN and the specific interface number. Defining IPv4 Interfaces Using CLI Commands The following table summarizes the CLI commands for setting fields displayed in the IPv4 Interfaces Parameters page. Table 9-18. IPv4 Interface Parameters CLI Commands CLI Command Description ip address ip-address {mask|prefix-length} no ip address [ip-address] Sets an IP address. Use the no form of the command to remove an IP address. show ip interface Displays the usability status of [[gigabitethernet|tengigabitet interfaces configured for IP. hernet]port-number|vlan vlan- id|port-channel LAG-number] Dell PowerConnect 55xx Systems User Guide 205