Dell PowerConnect 5548 User Guide - Page 295
Address Pool Start, Domain Name Server
View all Dell PowerConnect 5548 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 295 highlights
• Network Mask - Check and enter the pool's network mask. • Prefix Length - Check and enter the number of bits that comprise the address prefix. - Address Pool Start - Enter the first IP address in the range of the network pool. - Address Pool End - Enter the last IP address in the range of the network pool. - Lease Duration - Enter the amount of time a DHCP client can use an IP address from this pool. The total lease duration is 4294967295 seconds, i.e. 49710.2696 days. Thus a lease of 49710 days, 0 hours, 0 minutes and 0 seconds is a legal value, while a lease of 49710 days, 23 hours, 59 minutes and 59 seconds results in an Out of Range alert. • Days - The duration of the lease in number of days. The range is 0 to 49710 days. • Hours - The number of hours in the lease. A days value must be supplied before an hours value can be added. • Minutes - The number of minutes in the lease. A days value and an hours value must be added before a minutes value can be added. • Infinite - The duration of the lease is unlimited. - Default Router - Enter the default router for the DHCP client. - Domain Name Server - Enter the DNS server available to the DHCP client. - Domain Name - Enter the domain name for a DHCP client. The domain name may contain up to 32 characters. - NetBIOS WINS Server - Enter the NetBIOS WINS name server available to a DHCP client. - NetBIOS Node Type - Select how to resolve the NetBIOS name. Valid node types are: • Empty - Default value. • Broadcast - IP Broadcast messages are used to register and resolve NetBIOS names to IP addresses. Dell PowerConnect 55xx Systems User Guide 295