Dell PowerConnect 5548 User Guide - Page 348
Source File Name 1-64 characters, Destination File Type
View all Dell PowerConnect 5548 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 348 highlights
- Link Local Interface - When the server supports an IPv6 Link Local address, this specifies the Link Local interface. The possible options are: • VLAN - The VLAN on which the IPv6 interface is configured. • ISATAP - The IPv6 interface is configured on an ISATAP tunnel. 3 Select a Firmware/Configuration option. The possible options are: - Firmware Download - A firmware file is downloaded. - Configuration Download - A configuration file is downloaded. 4 Select to download firmware or a configuration file via a TFTP server in Download Protocol. 5 If the Firmware Download option was selected, enter the following: - Server IP Address - The IP address of the server from which the firmware file is downloaded. - Source File Name (1-64 characters) - The file to be downloaded. - Destination File Type - The destination file type to which the file is downloaded. The possible options are: • Software Image - Downloads the Image file. The image file overwrites the non-active image. It is recommended to designate that the non-active image becomes the active image after reset, and then to reset the device following the download. During the Image file download a dialog box opens that displays the download progress. The window closes automatically when the download is complete. • Boot Code - Downloads the Boot file. 6 If the Configuration Download option was selected, enter the following: - Server IP Address - The TFTP server IP address from which the configuration files are downloaded. - Source File Name (1-64 characters) - The configuration file to be downloaded. 348 Dell PowerConnect 55xx Systems User Guide