Dell PowerConnect 5548 User Guide - Page 471

Table 14-2. Port-to-VLAN Group Assignments CLI Commands (Continued) CLI Command Description switchport access vlan {vlanid|none} no switchport access vlan Configures the VLAN ID when the interface is in access mode. Use the no form of this command to restore the default configuration. switchport trunk allowed vlan {all|none|add vlan-list|remove vlan-list|except vlan-list} Sets the trunk characteristics when the interface is in Trunking mode. no switchport trunk allowed vlan Use the no form of this command to reset a trunking characteristic to the default. switchport trunk native vlan {vlan- Defines the native VLAN when id|none} the interface is in trunk mode. no switchport trunk native vlan Use the no form of this command to restore the default configuration. switchport general allowed vlan {add|remove} vlan-list [tagged|untagged] Sets the general characteristics when the interface is in general mode. no switchport general allowed vlan Use the no form of this command to reset a general characteristic to the default. switchport general pvid vlan-id no switchport general pvid Configures the PVID when the interface is in general mode. Use the no form of this command to restore the default configuration. switchport customer vlan vlan-id no switchport customer vlan Sets the port's VLAN when the interface is in customer mode. Use the no form of this command to restore the default configuration. Dell PowerConnect 55xx Systems User Guide 471