Dell PowerConnect 5548 User Guide - Page 386

• Current Power Consumption - Displays the current power consumption. • Power Savings - Displays the percentage of power saved by running in Green Ethernet mode. 4 Select a unit in the stack to display its power consumption parameters. Its ports are displayed along with the following settings. - Energy Efficient Ethernet • Oper - Enabled or not on the port • Remote Peer -Enabled or not on the remote peer - Short-Reach • Oper - Enabled or not on the port • Fault Reason -Reason that short reach is not enabled - Cable Length (Meter) - Length of cable. 5 Click LLDP Interface Details. 6 Select a unit in the stack. The following is displayed for each port on the unit: - Port - Port number. - Oper - Displays the operational status of Green Ethernet. - Resolved Tx Timer (μsec) - Integer that indicates the current Tw_sys_tx is supported by the local system. - Local Tx Timer (μsec) - Indicates the time (in micro seconds) that the transmitting link partner waits before it starts transmitting data after leaving Low Power Idle (LPI mode). - Resolved Rx Timer (μsec) - Integer that indicates the current Tw_sys_tx supported by the remote system. - Local Rx Timer (μsec) - Indicates the time (in micro seconds) that the receiving link partner requests that the transmitting link partner waits before transmission of data following Low Power Idle (LPI mode). - Remote Tx Timer (μsec) - Indicates the local link partner's reflection of the remote link partner's Tx value. 386 Dell PowerConnect 55xx Systems User Guide