Dell PowerConnect 5548 User Guide - Page 346
Source File Name 1-64 Characters
View all Dell PowerConnect 5548 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 346 highlights
3 Select a Firmware/Configuration option. The possible options are: - Firmware Download - A firmware file is downloaded. - Configuration Download - A configuration file is downloaded. 4 Select to download firmware or a configuration file via a USB port or HTTP in Download Protocol. 5 If the Firmware Download option was selected, enter the following: - Source File Name (1-64 characters) - The file to be downloaded. - Destination File Type - The destination file type to which the file is downloaded. The possible options are: • Software Image - Downloads the Image file. The image file overwrites the non-active image. It is recommended to designate that the non-active image becomes the active image after reset, and then to reset the device following the download. During the Image file download a dialog box opens that displays the download progress, and browsing is disabled. • Boot Code - Downloads the Boot file. 6 If the Configuration Download option was selected, enter the following: - Server IP Address - Enter the IP address of the server. - Source File Name (1-64 Characters) - Enter the source file name. - Destination File Name - Select the destination file to which the configuration file is downloaded. The possible options are: • Running Configuration - Check to download commands into the Running Configuration file. The current file is overwritten. • Startup Configuration - Check to download commands into the Startup Configuration file. The current file is overwritten. • New File Name (1-64 Characters) - Check to copy commands into a file in flash memory. Enter the filename. 7 Click Activate to start the download process. 346 Dell PowerConnect 55xx Systems User Guide