Dell PowerConnect 5548 User Guide - Page 405
Configuring LAGs Using CLI Commands, Admin Flow Control
View all Dell PowerConnect 5548 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 405 highlights
• 1000 Full - The LAG advertises for a 1000 mbps speed LAG and full duplex mode setting. - Current Advertisement - Displays the speed that the LAG advertises to its neighbor LAG to start the negotiation process. The possible field values are those specified in the Admin Advertisement field. - Neighbor Advertisement - Displays the neighboring LAG advertisement settings. The field values are identical to the Admin Advertisement field values. - Admin Flow Control - Enable/disable flow control on the LAG. Flow Control mode is effective on the ports operating in Full Duplex in the LAG. The possible options are: • Enable - Enables flow control on the LAG (default). • Disable - Disables flow control on the LAG. • Auto Negotiation - Enables the auto-negotiation of flow control on the LAG. - Current Flow Control - Displays the current Flow Control setting. Configuring LAGs Using CLI Commands The following table summarizes the CLI commands for configuring LAGs as displayed in the LAG Configuration pages. Table 10-9. LAG Configuration CLI Commands CLI Command Description interface port-channel LAGnumber Enters the interface configuration mode of a specific LAG. channel-group port-channel mode Sets a mode for a LAG. {on|auto} no channel-group Use the no form of this command restore the default configuration. description string no description Adds a description to a LAG. Use the no form of this command to remove the description. Dell PowerConnect 55xx Systems User Guide 405