Dell PowerConnect 5548 User Guide - Page 260
Defining Access Profile Rules Using CLI Commands, Table 9-41., Access Profiles CLI Commands
View all Dell PowerConnect 5548 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 260 highlights
Defining Access Profile Rules Using CLI Commands The following table summarizes the CLI commands for adding rules to access profiles. Table 9-41. Access Profiles CLI Commands CLI Command Description permit[[gigabitethernet|tengigab itethernet port-number]|vlan vlan-id|port-channel LAG-number] [service service] Sets port permit conditions for the management access list. permit ip-source {ipv4address|ipv6-address|prefixlength} [mask mask|prefixlength] [[gigabitethernet|tengigabitethe rnet][port-number|vlan vlanid|port-channel LAG-number] [service service] Sets port permitting conditions for the management access list, and the selected management method. deny [[gigabitethernet|tengigabitethe rnet] port-number|vlan vlanid|port-channel LAG-number] [service service] Sets port denying conditions for the management access list, and the selected management method. deny ip-source {ipv4address|ipv6-address|prefixlength} [mask mask|prefixlength] [[gigabitethernet|tengigabitethe rnet] port-number|vlan vlanid|port-channel LAG-number] [service service] Sets port denying conditions for the management access list, and the selected management method. management access-class {console-only|name} no management access-class Defines which access-list is used as the active management connections. Use the no form of this command to disable management connection restrictions. 260 Dell PowerConnect 55xx Systems User Guide