Dell PowerConnect 5548 User Guide - Page 475
VLAN IDs are 1-4095. VLAN 4095 is defined as per standard and, industry practice
View all Dell PowerConnect 5548 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 475 highlights
- Port VLAN Mode - Enter the port VLAN mode. The possible options are: • General - The port belongs to VLANs, and each VLAN is user-defined as tagged or untagged (full 802.1Q mode). • Access - The port belongs to a single untagged VLAN. When a port is in Access mode, the packet types that are accepted on the port cannot be designated. Ingress filtering cannot be enabled/disabled on an access port. • Trunk - The port belongs to VLANs on which all ports are tagged (except for one port that can be untagged). • Customer - When a port is in Customer mode, an added tag provides a VLAN ID to each customer, ensuring private and segregated network traffic for that customer. • Private VLAN Promiscuous - The port is a promiscuous port. • Private VLAN Host - The port is an isolated port - Current Reserved VLAN - Displays the VLAN currently designated as the reserved VLAN. - Reserve VLAN for Internal Use (1-4094) - Enter the VLAN that is designated as the reserved VLAN after the device is reset, or select None. - PVID (1-4095) - Assigns a VLAN ID to untagged packets. The possible VLAN IDs are 1-4095. VLAN 4095 is defined as per standard and industry practice, as the discard VLAN. Packets classified to this VLAN are dropped. - VLAN List (I - Inactive Configuration) - Enter the VLAN(s) to which this LAG belongs, and indicate its type. The possible options are: • T - Tagged. The LAG is a member of a VLAN. All packets forwarded by the LAG are tagged. The packets contain VLAN information. • U - Untagged. The LAG is a member of a VLAN. Packets forwarded by the LAG are untagged. • F - Forbidden. The LAG is denied membership to a VLAN. Click Add to move the LAG to the VLAN list together with its type. Dell PowerConnect 55xx Systems User Guide 475