Dell PowerConnect 5548 User Guide - Page 507
Adding Ports to LAGs Using CLI Commands, Select the LAG.
View all Dell PowerConnect 5548 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 507 highlights
The LACP and static LAGs on each unit are displayed along with their member ports. This page displays the following fields: - LACP - Aggregates the port to a LAG, using LACP. - LAG - Adds a port to a LAG, and indicates the specific LAG to which the port belongs. 2 Click Edit to change the status of a port in a LAG. 3 Select the LAG. 4 In the LACP row (the first row), toggle the button under the port number to assign either the LACP or the static LAG. 5 In the LAG row (the second row), toggle the button to a specific number to aggregate or remove the port to that LAG number. Adding Ports to LAGs Using CLI Commands The following table summarizes the CLI commands for assigning ports to LAGs as displayed in the LAG Membership pages. Table 15-2. LAG Membership CLI Commands CLI Command channel-group LAG-number mode {on|auto} no channel-group show interfaces portchannel [LAG-number] Description Associates a port with a port-channel with or without a LACP operation. Use the no form of this command to remove the channel-group configuration from the interface. Displays port-channel information for all port channels or for a specific port channel. The following is an example of the CLI commands: console(config)# interface gi1/0/11 console(config-if)# channel-group 1 mode on Dell PowerConnect 55xx Systems User Guide 507