Dell PowerConnect 5548 User Guide - Page 62
PowerConnect 5500 Series User Guide, Thank you for using Dell Easy Setup Wizard. - web interface
View all Dell PowerConnect 5548 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
12 Enter the default gateway. 13 Press Enter. The following is displayed (example): This is the configuration information that has been collected: SNMP Interface = "Dell Network Manager"@192.168.2.10 User Account setup = admin Password Management IP address = 192.168.2.100 255.255.255.0 Default Gateway = 192.168.2.1 The following information is displayed: If the information is correct, please select (Y) to save the configuration and copy to the start-up configuration file. If the information is incorrect, select (N) to discard configuration and restart the wizard: [Y/N] 14 Enter [N] to restart the wizard or enter [Y] to complete the Setup Wizard. If you enter [Y] the following is displayed: Configuring SNMP management interface. Configuring user account....... Configuring IP and subnet...... Thank you for using Dell Easy Setup Wizard. You will now enter CLI mode. The CLI prompt is displayed. You have finished the initial configuration. After the initial configuration is complete, you can manage the switch from the connected console port using the CLI or remotely through the management interface, using Telnet or the Web GUI. See the Dell PowerConnect 5500 Series User Guide found on the Documentation CD. 62 Dell PowerConnect 55xx Systems User Guide