Dell PowerConnect 5548 User Guide - Page 177
Defining SNTP Global Settings Using CLI Commands, SNTP Authentication
View all Dell PowerConnect 5548 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 177 highlights
Defining SNTP Global Settings Using CLI Commands The following table summarizes the CLI commands for setting fields displayed in the SNTP Global Settings pages. Table 9-8. SNTP Global Parameters CLI Commands CLI Command sntp client poll timer seconds no sntp client poll timer sntp broadcast client enable no sntp broadcast client enable sntp anycast client enable no sntp anycast client enable sntp unicast client enable no sntp unicast client enable show sntp configuration Description Sets the polling time for an SNTP client. Use the no form of this command to restore the default configuration. Enables SNTP Broadcast clients. Use the no form of this command to disable SNTP Broadcast clients. Enables SNTP Anycast clients. Use the no form of this command to disable SNTP Anycast clients. Enables SNTP predefined Unicast clients. Use the no form of this command to disable SNTP Unicast clients. Displays SNTP configuration The following is an example of the CLI commands: console(config)# sntp anycast client enable SNTP Authentication Use the SNTP Authentication page to enable/disable SNTP authentication between the device and an SNTP server, and to set the means by which the SNTP server is authenticated. Dell PowerConnect 55xx Systems User Guide 177