Dell PowerConnect 5548 User Guide - Page 546

Configuring MED on Ports Using CLI Commands The following commands are used to set the fields in the MED Port Settings pages. Table 17-4. LLDP Properties CLI Commands CLI Command Description lldp med enable [tlv ... tlv4] Enables LLDP MED on an interface. no lldp med enable Use the no form of this command to disable LLDP MED on an interface. lldp med network-policy {add|remove} number Attaches or removes an LLDP MED network policy on an interface. no lldp med network-policy number Use the no form of this command to remove all the LLDP MED network policies from the interface lldp med location {{coordinate data}|{civicaddress data}|{ecs-elin data}} no lldp med location {coordinate|civicaddress|ecs-elin} configure the LLDP MED for an interface. Use the no form of this command to delete location information for an interface. show lldp med configuration Displays the LLDP MED configuration [gigabitethernet|tengigabitet for all interfaces or for a specific hernet] port-number interface. show lldp local Displays the LLDP information that is [gigabitethernet|tengigabitet advertised from a specific port. hernet] port-number 546 Dell PowerConnect 55xx Systems User Guide