Dell PowerConnect 5548 User Guide - Page 35

Front Panel Figure 5-1 shows the front panel of the PowerConnect 5548 device with its various ports labelled. The PowerConnect 5524 device from the PowerConnect 5548 device in that there are 24 G ports and not 48. Figure 5-2 shows the buttons/LEDs on the right side in greater detail. Figure 3-1. PowerConnect 5548 Ports Giga Ports (odd numbered) ConsoleUSB Port Port HDMI Ports Giga Ports (even numbered) SPF+ Ports The following ports are found on the devices. • 24/48 G Ports • Two XG Ports (also known as Small Form Factor Plugable (SFP)+ Ports) These are 10 Gigabit ports, designated as 1000Base-X-SFP+. The SFP+ ports are fiber transceivers designated as 10000 Base-SX or LX. They include TWSI (Two-Wire Serial Interface) and internal EPROM. • RS-232 Console Port This port is used for a terminal connection for debugging and software downloads. The default baud rate is 9,600 bps. The baud rate can be configured from 2400 bps up to 115,200 bps. • Two HDMI Ports The HDMI ports are 1.3a specification, category 2 high-speed cables, 340 MHz (10.2 Gbit/s). They are used for stacking purposes. Dell PowerConnect 55xx Systems User Guide 35