Dell PowerConnect 5548 User Guide - Page 328
UDP Port 1-65535
View all Dell PowerConnect 5548 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 328 highlights
- Link Local Interface - When the server supports an IPv6 Link Local address, this specifies the Link Local interface. The possible options are: • VLAN - The IPv6 interface is configured on this VLAN. • ISATAP - The IPv6 interface is configured on an ISATAP tunnel. - Recipient IP - The IP address to whom the traps are sent. - Notification Type - The notification sent. The possible options are: • Trap - Traps are sent. • Inform - Informs are sent. If SNMP versions 1 and 2 are enabled for the selected recipient, enter the fields: - Community String - The community string of the trap manager. - Notification Version - The message trap SNMP version (v1 or v2). If SNMPv3 is used to send and receive traps, enter the fields: - User Name - The user to whom SNMP notifications are sent. - Security Level - The means by which the packet is authenticated. The possible options are: • No Authentication - The packet is neither authenticated nor encrypted. • Authentication - The packet is authenticated. • Privacy - The packet is both authenticated and encrypted. 3 Enter the fields for all versions of SNMP: - UDP Port (1-65535) - The UDP port used to send notifications. The default is 162. - Filter Name - Select an SNMP filter from a list of previously-defined SNMP filters. - Timeout (1-300) - The amount of time (seconds) the device waits before resending informs. - Retries (1-255) - The amount of times the device resends an inform request. 328 Dell PowerConnect 55xx Systems User Guide