Dell PowerConnect 5548 User Guide - Page 342
Auto Update Configuration Using CLI Commands
View all Dell PowerConnect 5548 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 342 highlights
The auto-update-configuration options are displayed. 2 Modify the auto-update configuration parameters as required: - Configuration Auto-Config (boot host auto-config)- Enable/disable automatic download of the configuration parameters to the Running Configuration file. By default, this occurs only if the Startup Configuration file is empty. - Firmware Auto-Update (boot host auto-update)- Enable/disable automatic download of the image file. - Force Configuration Download at Next Startup (boot host dhcp) - Enable/disable the Configuration Auto Update option to work even if the Startup Configuration file is not empty. - Auto-Copy Running Configuration to Startup Configuration After Download (boot host auto-save)- Enable/disable the Running Configuration file to be automatically copied to the Startup Configuration file after downloading the Running Configuration file. Auto Update Configuration Using CLI Commands The following table summarizes the CLI commands for setting fields displayed in the Auto Update of Configuration/Image File page. Table 9-63. Auto Update of Configuration/Image File CLI Commands CLI Command boot host auto-config no boot host auto-config boot host auto-update no boot host auto-update Description Enables the support of autoconfiguration via DHCP. Use the no form of this command to disable DHCP auto configuration. Enables the support of auto-update via DHCP. Use the no form of this command to disable DHCP auto configuration 342 Dell PowerConnect 55xx Systems User Guide