Dell PowerConnect 5548 User Guide - Page 355

- Active Image - The name of the image file that is currently active on the unit in the stack. - After Reset - The image file that will be active on the unit in the stack after the device is reset. The possible options are: • Image 1 - Activates Image file 1 after the device is reset. • Image 2 - Activates Image file 2 after the device is reset. 2 Click Apply to select the image file to be used after reset in After Reset. Working with the Active Image File Using CLI Commands The following table summarizes the CLI commands for viewing fields displayed in the Active Images. Table 9-66. Active Image CLI Commands CLI Command boot system {image1|image-2} [switch number|all] show version [unit unit] Description Sets the system image that the device loads at startup. Displays version information for the system The following is an example of the CLI commands: console# boot system image-1 all Copy Files Firmware and configuration files can be copied between units in the stack. Use the Copy Files page to perform the following: • Copy the firmware on the Master unit to another unit in the stack. • Copy the master Running Configuration file to the master sTartup Configuration file, or copy the configuration to a user-defined configuration file. • Copy the master Startup Configuration file to a backup file on the Flash file system or to a USB if available. Dell PowerConnect 55xx Systems User Guide 355