Dell PowerConnect 5548 User Guide - Page 191
Enabling Logs Using CLI Commands, Log Copy Files Events, Log Management Access Events
View all Dell PowerConnect 5548 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 191 highlights
- Log Copy Files Events - Enable/disable generating logs when files are copied. - Log Management Access Events - Enable/disable generating logs when the device is accessed using a management method, for example, each time the device is accessed using SSH, a device log is generated. 4 To select the destination of logging messages, according to their severity levels, check the minimum severity level that will be associated with the console log, RAM log, Log file (Flash memory) and remote SYSLOG servers. When a severity level is selected, all severity levels above the selection are selected automatically. Enabling Logs Using CLI Commands The following table summarizes the CLI commands for setting fields displayed in the Global Parameters page. Table 9-13. Global Log Parameters CLI Commands CLI Command logging on no logging logging console level no logging console level logging file level no logging file file-system logging {copy|delete-rename} Description Enables error message logging. Turns off error message logging. Limits messages logged to the console, based on severity. Use the no form of this command to disable logging limiting to the console. Limits SYSLOG messages stored in flash memory, based on severity. Use the no form of this command to cancel using the buffer. Enables the logging of file system events. Dell PowerConnect 55xx Systems User Guide 191