Dell PowerConnect 5548 User Guide - Page 699
Full Duplex Mode, Dynamic VLAN Assignment DVA, Egress Ports, End System, Ethernet, Embedded Web Server
View all Dell PowerConnect 5548 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 699 highlights
• Full Duplex Mode - Permits for bisynchronous communication, for example, a telephone. Two parties can transmit information at the same time. • Half Duplex Mode - Permits asynchronous communication, for example, a walkie-talkie. Only one party can transmit information at a time. Dynamic VLAN Assignment (DVA) • Allows automatic assignment of users to VLANs during the RADIUS server authentication. When a user is authenticated by the RADIUS server, the user is automatically joined to the VLAN configured on the RADIUS server. E Egress Ports Ports from which network traffic is transmitted. End System An end user device on a network. Ethernet Ethernet is standardized as per IEEE 802.3. Ethernet is the most common implemented LAN standard. Supports data transfer rates of Mpbs, where 10, 100 or 1000 Mbps is supported. EWS Embedded Web Server. Provides device management via a standard web browser. Embedded Web Servers are used in addition to or in place of a CLI or NMS. F FFT Fast Forward Table. Provides information about forwarding routes. If a packet arrives to a device with a known route, the packet is forwarded via a route listed in the FFT. If there is not a known route, the CPU forwards the packet and updates the FFT. FIFO Dell PowerConnect 55xx Systems User Guide 699