Dell PowerConnect 5548 User Guide - Page 146

• Shutdown - Discard the packet from any unlearned source and shut down the port. Ports remain shutdown until they are activated, or the switch is reset. Host Authentication pages: Table 8-16. Host Authentication CLI Commands CLI Command Description dot1x host-mode {multihost|single-host|multisessions} Allows a single host (client) or multiple hosts on an IEEE 802.1x-authorized port. dot1x traps macauthentication failure no dot1x traps macauthentication failure Enables sending traps when a MAC address is successfully authenticated by the 802.1X mac-authentication access control. Use the no form of this command to disable the traps. dot1x traps macauthentication success no dot1x traps macauthentication success Enables sending traps when MAC address was failed in authentication of the 802.1X MAC authentication access control. Use the no form of this command to disable the traps. dot1x violation-mode {restrict | protect | shutdown} no dot1x violation-mode Configures the action to be taken, when a station whose MAC address is not the supplicant MAC address, attempts to access the interface. Use the no form of this command to return to default. show dot1x advanced Displays 802.1x advanced features for the [gigabitethernet|tengigabite device or specified interface. thernet] port-number] The following is an example of the CLI commands: console(config)# interface gi1/0/1 console(config-if)# dot1x host-mode multi-host console(config-if)# dot1x host-mode single-host console(config-if)# dot1x host-mode multi-sessions 146 Dell PowerConnect 55xx Systems User Guide