Dell PowerConnect 5548 User Guide - Page 649

- Scheduling WRR Weight - If WRR is selected, enter the WRR weight assigned to the queue. - % of WRR Bandwidth - Displays the amount of bandwidth assigned to the queue. These values represent the percent of the WRR weight. Configuring Queue Settings Using CLI Commands The following table summarizes the CLI commands for configuring fields in the Queue page. Table 22-3. Queue Setting CLI Commands CLI Command priority-queue out num-ofqueues number-of-queues no priority-queue out numof-queues wrr-queue bandwidth weight1 weight2 ... weight_n no wrr-queue bandwidth Description Configures the number of expedite queues. Use the no form of this command to restore the default configuration. Assigns WRR weights to egress queues. Use the no form of this command to restore the default configuration. The following is an example of the CLI commands: console(config)# priority-queue out num-of-queues 2 console(config-if)# wrr-queue bandwidth 6 6 6 6 6 6 Mapping to Queue This section provides information for mapping DSCP and CoS values to service queues, and contains the following topics: • CoS to Queue • DSCP to Queue Dell PowerConnect 55xx Systems User Guide 649