Dell PowerConnect 5548 User Guide - Page 152
System Location 0-159 Characters
View all Dell PowerConnect 5548 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 152 highlights
2 Enter/view the parameters: - System Name (0-159 Characters) - Enter the user-defined device name. - System Contact (0-159 Characters) - Enter the name of the contact person. - System Location (0-159 Characters) - Enter the location where the system is currently running. - MAC Address - Displays the device MAC address. - Sys Object ID - Displays the vendor's authoritative identification of the network management subsystem contained in the entity. - Date - Enter the current date (mandatory). This date can also be entered in the Manual Time Settings page. If SNTP has been defined, but the SNTP server is not available, the switch uses the date and time in this field and the Time field. - Time - Enter the current time (mandatory). This time can also be entered in the Manual Time Settings page. If SNTP has been defined, but the SNTP server is not available, the switch uses the date and time in this field and the Date field. - System Up Time - Displays the amount of time since the last device reset. 3 For each unit in the stack (displayed in Unit No.), the following information is displayed: - Service Tag - Displays the service reference number used when servicing the device. - Asset Tag - Enter the device asset tag. - Serial No. - Displays the device serial number. 4 Enter the Asset Tag (0-16 Characters) for each unit in the stack. This is the user-defined reference for the unit. 152 Dell PowerConnect 55xx Systems User Guide