Dell PowerConnect 5548 User Guide - Page 312

Table 9-56. SNMP Global Parameters Commands (Continued) CLI Command snmp-server trap authentication no snmp-server trap authentication show snmp Description Enables the router to send Simple Network Management Protocol traps when authentication fails. Use the no form of this command to disable SNMP failed authentication traps. Checks the status of SNMP communications. The following is an example of the CLI commands: console(config)# snmp-server enable traps console(config)# snmp-server trap authentication console(config)# snmp-server engineid local default The engine-id must be unique within your administrative domain. Do you wish to continue? [Y/N]y The SNMPv3 database will be erased. Do you wish to continue? [Y/N]y SNMP Views An SNMP view, which is a collection of MIB subtrees, provides or blocks access to device features. Each subtree is defined by the Object ID (OID) of the root of its subtrees. In extreme cases this subtree can be a leaf. Well-known names can be used to specify the root of the desired subtree, or an OID can be entered (see "Model OIDs" on page 309). Each subtree is either included in or excluded from the view being defined. 312 Dell PowerConnect 55xx Systems User Guide